Command Reference Guide

Administration Commands
delete_userid_password
Other Conditions
Appendix A, Common Return Codes from snapadmin Commands, lists combinations of primary and secondary
return codes that are common to all commands.
2.94 delete_userid_password
The delete_userid_password command deletes a password associated with a user ID, or deletes profiles for
a user ID and password.
2.94.1 Supplied Parameters
Parameter name Type Length Default
[delete_userid_password]
delete_type constant REMOVE_USER
user_id character 10
profile character 10 (null string)
(When you are deleting profiles without deleting the user, you can specify up to ten profile parameters.)
Supplied parameters are:
delete_type
Specifies the type of information to be deleted. Possible values are:
REMOVE_USER
Delete the user, password, and all associated profiles.
REMOVE_PROFILES
Delete only the specified profiles.
user_id
User identifier. This ID is a type-AE character string.
profile
Profiles associated with the user. Each profile is a type-AE character string.
2.94.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.94.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
287