Command Reference Guide

Administration Commands
delete_lu62_timeout
resource_type constant GLOBAL_TIMEOUT
resource_name character 17 (null string)
Supplied parameters are:
resource_type
Specifies the type of timeout being deleted. Possible values are:
GLOBAL_TIMEOUT
Delete timeouts that apply to all LU 6.2 sessions for the local node.
LOCAL_LU_TIMEOUT
Delete timeouts that apply to all LU 6.2 sessions for the local LU specified in the resource_name
parameter.
PARTNER_LU_TIMEOUT
Delete timeouts that apply to all LU 6.2 sessions to the partner LU specified in the resource_name
parameter.
MODE_TIMEOUT
Delete timeouts that apply to all LU 6.2 sessions on the mode specified in the resource_name parameter.
resource_name
Name of the resource whose timeout is being deleted. This value can be one of the following:
• If resource_type is set to
GLOBAL_TIMEOUT, do not specify this parameter.
• If resource_type is set to LOCAL_LU_TIMEOUT, specify 1–8 type-A characters as a local LU name.
• If resource_type is set to PARTNER_LU_TIMEOUT, specify the fully qualified name of the partner LU
as follows: 3–17 type-A characters consisting of a 1–8 character network name, followed by a period,
followed by a 1–8 character partner LU name.
• If resource_type is set to MODE_TIMEOUT, specify 1–8 type-A characters as a mode name.
2.83.2 Returned Parameters
If the command executes successfully, the following parameter is returned:
primary_rc
OK
secondary_rc
(This parameter is not used.)
2.83.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
275