Command Reference Guide

Administration Commands
delete_directory_entry
2.68.1 Supplied Parameters
Parameter name Type Length Default
[delete_directory_entry]
resource_name character 17
resource_type constant LU_RESOURCE
Supplied parameters are:
resource_name
Fully qualified name of the resource to be deleted. Specify 3–17 type-A characters consisting of a 1–8
character network name, followed by a period, followed by a 1–8 character resource name.
resource_type
Specifies the type of the resource to be deleted. Possible values are:
ENCP_RESOURCE
End node (EN) or low-entry networking (LEN) node
NNCP_RESOURCE
Network node (NN)
LU_RESOURCE
Logical unit (LU)
WILDCARD_LU_RESOURCE
Wildcard LU name
2.68.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.68.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
PARAMETER_CHECK
secondary_rc
Possible values are:
INVALID_FQ_LU_NAME
The resource_name parameter was not the name of a defined LU.
INVALID_RESOURCE_TYPE
The resource_type parameter was not set to a valid value.
State Check
If the command does not execute because of a state error, SNAplus2 returns the following parameters:
255