Command Reference Guide

Administration Commands
define_tr_port, define_ethernet_port, define_fddi_port
2.61.1 Supplied Parameters
Parameter name Type Length Default
[define_tr_port], [define_ethernet_port], [define_fddi_port]
port_name character 8
description character 31 (null string)
dlc_name character 8
port_number decimal 1
max_rcv_btu_size decimal 4105 (TR)
1033 (Ethernet)
4105 (FDDI)
tot_link_act_lim decimal 64
inb_link_act_lim decimal 0
out_link_act_lim decimal 0
ls_role constant LS_NEG
implicit_dspu_services constant NONE
implicit_dspu_template character 8 (null string)
implicit_ls_limit decimal
act_xid_exchange_limit decimal 9
nonact_xid_exchange_limit decimal 5
ls_xmit_rcv_cap constant LS_TWS
max_ifrm_rcvd decimal 7
target_pacing_count decimal 7
max_send_btu_size decimal 4105 (TR)
1033 (Ethernet)
4105 (FDDI)
lsap_address hex number 0x04
implicit_cp_cp_sess_support constant YES
implicit_limited_resource constant NO
implicit_hpr_support constant NO
implicit_link_lvl_error constant
implicit_deact_timer decimal 30
implicit_uplink_to_en constant NO
effect_cap decimal 3993600 (TR)
3993600 (Ethernet)
98304000 (FDDI)
connect_cost decimal 0
byte_cost decimal 0
security constant SEC_NONSECURE
prop_delay constant PROP_DELAY_LAN
user_def_parm_1 decimal 0
user_def_parm_2 decimal 0
user_def_parm_3 decimal 0
initially_active constant YES
test_timeout decimal 5
test_retry_limit decimal 2
xid_timeout decimal 5
xid_retry_limit decimal 2
t1_timeout decimal 5
t1_retry_limit decimal 5
Supplied parameters are:
port_name
Name of the port to be defined. This name is a character string using any locally displayable characters.
description
A text string describing the port. SNAplus2 uses this string for information only. It is stored in the node’s
configuration file and returned on the query_port command.
dlc_name
241