Command Reference Guide

Administration Commands
define_sdlc_dlc
Type of adapter card used by the DLC. Possible values are:
HP_PSI
Single-port PSI card
HP_ACC
8-port ACC card
HP_EICON_PCI_SDLC
Eicon PCI SDLC card
adapter_number
Adapter number used by the DLC. If the server contains more than one SDLC adapter card, specify 0 (zero)
for the first card, 1 for the second card, and so on. Otherwise, set this parameter to 0 (zero).
initially_active
Specifies whether this DLC is automatically started when the node is started. Possible values are:
YES
The DLC is automatically started when the node is started.
NO
The DLC is automatically started only if a port or LS that uses the DLC is defined as initially active;
otherwise, it must be manually started.
mu_credit
Specifies the credit value for sending DLC_MUs to the link component. Set this parameter to 4.
stats_support
Specifies whether the DLC collects link statistics information. Possible values are:
YES
The DLC collects link statistics information, which can be examined using query_statistics.
NO
The DLC does not collect link statistics information.
num_ports
The maximum number of ports that this DLC needs to support at a time.
2.50.2 Returned Parameters
No parameters are returned by SNAplus2 when this command executes successfully.
2.50.3 Error Return Codes
If the command cannot be executed, SNAplus2 returns a primary return code to indicate the type of error and a
secondary return code to provide specific details about the reason for unsuccessful execution.
Parameter Check
If the command does not execute because of a parameter error, SNAplus2 returns the following parameters:
primary_rc
180