Command Reference Guide

Administration Commands
define_lu_0_to_3
Network accessible unit address of the LU. This address is a number in the range 1–255.
pool_name
Name of the pool to which this LU belongs. This name is an 8-byte type-A character string. If a pool with
the specified name is not already defined, SNAplus2 adds a new pool with this name and assigns the LU to it.
If the LU does not belong to a pool, do not specify this parameter.
pu_name
Name of the PU (defined using define_*_ls) that this LU will use. This name is a type-A character string
starting with a letter.
priority
LU priority when sending to the host. Possible values are:
NETWORK
The LU has priority on the network.
HIGH
High priority is given to the LU.
MEDIUM
Medium priority is given to the LU.
LOW
Low priority is given to the LU.
lu_model
Type of the LU. Possible values are:
3270_DISPLAY_MODEL_2
LU type is a 3270 display model 2.
3270_DISPLAY_MODEL_3
LU type is a 3270 display model 3.
3270_DISPLAY_MODEL_4
LU type is a 3270 display model 4.
3270_DISPLAY_MODEL_5
LU type is a 3270 display model 5.
PRINTER
LU type is a printer.
SCS_PRINTER
LU type is an SCS printer.
RJE_WKSTN
LU type is an RJE workstation.
UNKNOWN
LU type is unknown. LU type will be determined when the session to the host is established.
123