CLI Reference Guide

2-63
NET.CFG Options Reference
NetWare DOS Requester Option
NETWARE DOS REQUESTER
Controls network requests from your client workstation to a NetWare server
or network.
AUTO LARGE TABLE=[on | off]
Allocates a small table of 34 bytes per connection for bindery reconnects.
When the parameter is enabled, the AUTO.VLM program allocates a large
connection table of 178 bytes per connection for bindery reconnects.
Change the default value to “on” if the length of your username and
password combined is more than 16 characters.
Syntax netware dos requester
parameter_name=value
Replace parameter_name with the name of the
parameter you want to use.
Replace value with the value setting which
corresponds with the parameter name.
Example To configure for four server connections, you would place
these lines in your NET.CFG file:
netware dos requester
connections=4
Syntax auto large table=[on | off]
Default off
Modules AUTO.VLM
Example To use a username and password longer than 16 characters
combined, you would place the following lines in your
NET.CFG file:
netware dos requester
auto large table=on