CLI Reference Guide

2-46
NET.CFG Options Reference
Link Support Option
Link Support Option
Use this option of the NET.CFG file to configure the number and size of the
receive buffers, the size of the memory pool buffers, and the number of
boards and stacks used by the Link Support Layer™ (LSL).
Available Parameters and Values for the Link Support Option
This option has the following parameters and values, which are discussed on
the following pages.
LINK SUPPORT
Determines the number and size of the receive buffers, the size of the
memory pool buffers, and the number of boards and stacks used by the
LSL™ program.
Parameters and Values
BUFFERS communication_number [buffer_size]
MAX BOARDS number
MAX STACKS number
MEMPOOL number [k]
Syntax
link support
parameter_name value
Replace parameter_name with the name of the
parameter you want to use.
Replace value with the value setting which
corresponds with the parameter name.
Example To configure for four network boards, you would place the
following lines in your NET.CFG file:
link support
max boards 4