CLI Reference Guide

2-40
NET.CFG Options Reference
Link Driver Option
SLOT number
In slot-based machines, the LAN driver usually locates the network board by
scanning through the slots in order from lowest to highest.
This option directs the driver to locate the network board in the specified
slot, instead of scanning for it.
Table 2-6 List and Description of Protocols and Frame Types with Their Identification
Numbers
Frame
ID
Frame Type Protocol
Protocol
ID
Number
Description
2 ETHERNET_II IPX/SPX 8137h Ethernet using a DEC* Ethernet II
envelope
2 ETHERNET_II IP 800h Ethernet using a DEC Ethernet II
envelope
3 ETHERNET_802.2 IPX/SPX E0h Ethernet (802.3) using an 802.2
envelope
4 Token-Ring IPX/SPX E0h Token ring (802.5) using an 802.2
envelope
5 ETHERNET_802.3 IPX/SPX 00h IPX 802.3 raw encapsulation
19 IP IPX/SPX N/A IP Tunnel frame envelope
20 FDDI_802.2 IPX/SPX E0h FDDI using an 802.2 envelope
Syntax slot number
Use the number of the slot you inserted the
network board into. The slot number is usually
found on the back of the computer.
Default None