CLI Reference Guide

2-29
NET.CFG Options Reference
Link Driver Option
NOTE: This is not a conclusive list of bus types. You can obtain an updated list of identifiers
from the Novell Labs™ facility.
The default value indicates that the LAN driver should search each of the machine’s
buses for a supported network board. The LAN driver should then initialize the first
supported network board it finds. The LAN driver determines the order that the buses
are searched in.
DMA [#1 | #2] channel_number
Specifies the hardware setting of the network board used in the workstation.
It allows DMA channels to be configured..
Bus Type Identification Number
ISA 0
MCA 1
EISA 2
PCMCIA 3
PCI 4
VL (VESA Local Bus) 5
Syntax
bus id name number
Replacename with the name of the bus type you want
to use.
Replace number with the identification number
that corresponds with the bus type that you want
to use.
Default -1 0FFh
Example To specify the bus type for an ISA adapter, you would
place the following lines in your NET.CFG file:
link driver ntr2000
bus id isa 0