CLI Reference Guide

2-8
NET.CFG Options Reference
Using NET.CFG Options and Parameters
Table 2-1 NET.CFG Options
desktop snmp
asynchronous timeout number
control community [“name | public | private”]
enable control community [specified | any | off | omitted]
enable monitor community [specified | any | off | omitted]
enable trap community [specified | off | omitted]
monitor community [“name | public | private”]
snmpenableauthentrap [on | off]
syscontact “contact”
syslocation “location”
sysname “name”
trap community [“name | public | private”]
20 ticks
public
specified
specified
specified
public
off
(none)
(none)
(none)
public
link driver driver_name
alternate
bus name number
dma [#1 | #2] channel_number
frame frame_type_name [addressing_mode]
irq [#1 | #2] interrupt_request_number
max frame size number
mem [#1 | #2] hex_starting_address [hex_length]
node address hex_address [mode]
port [#1 | #2] hex_starting_address [hex_number_of_ports]
protocol “name” hex_protocol_id frame_type
slot number
(none)
(autodetect name), -1 (0FFh)
#1, 3
~
#1, 3
1024
#1, D000, ~
(none)
#1, 300, ~
(none)
1
link support
buffers communication_number [buffer_size]
max boards number
max stacks number
0, 1130
4
4
netware dos requester
auto large table=[on | off]
auto reconnect=[on | off]
auto retry=number
average name length=number
bind reconnect=[on | off]
broadcast retries=number
off
on
0
48
off
3