CLI Reference Guide

2-7
NET.CFG Options Reference
Using NET.CFG Options and Parameters
Using NET.CFG Options and Parameters
NetWare and Personal NetWare™ workstations support the following
configuration options in the NET.CFG file:
• Desktop SNMP Option
• Link Driver Option
• Link Support Option
• NetWare DOS Requester Option
• Protocol IPX Option
• Protocol SPX Option
• Protocol TCPIP Option
• Transport Provider IPX | UDP Option
NOTE: Because many products use the NET.CFG file for managing configuration
information, this might not be a comprehensive list of all the options used in your
NET.CFG file.
See the third-party manufacturer’s product documentation or the most current
README file provided with this NetWare Client for DOS and MS Windows kit for
information.
Table 2-1 shows the various parameters and values that you can use. Notice
the following markings in figure text:
* The default value is the maximum value for NetWare 2 and NetWare 3™
networks.
+This option is valid for NetWare 4™ networks only.
~ Defaults vary depending on your network setup. See the corresponding
option heading in this chapter for specific information.