CLI Reference Guide

3-5
Command Line Parameters Reference
Core NetWare Client Software
Use the command line parameters discussed in the following sections in
order to set nondefault settings for the core NetWare Client software.
IPXODI.COM
Use the following command line parameters to manage the IPXODI.COM
software.
VLM.EXE
NetWare DOS Requester
DOS client software that provides the interface between DOS and the
network. Is loaded when you run the STARTNET.BAT file.
Consists of individual modules that provide various network services.
Loads drivers that the NetWare DOS Requester needs in order to
communicate with the network hardware.
Parameter Option Explanation
Configuration File /C
Indicates alternate filename for
configuration information.
/C = [path\]filename
Eliminate Diagnostic
Responder and SPX
/A
Eliminates diagnostic responder and SPX,
reducing memory size by 9 KB.
Eliminate Diagnostic
Responder
/D
Eliminates diagnostic responder, reducing
memory size by 3 KB.
Force Unload /F
Forcibly unloads IPXODI.COM file from
memory. Might cause system to hang.
Help /?
Displays help screen.
Table 3-1 Explanation of the Core NetWare Client Software
Software Explanation