CLI Reference Guide

2-126
NET.CFG Options Reference
Transport Provider IPX | UDP Option
Transport Provider IPX | UDP Option
The Desktop SNMP transport providers, STPIPX.COM and STPUDP.COM,
read the configuration file to discover trap targets on NetWare networks.
Use this option of the NET.CFG file to specify the trap target address for
your SNMP desktops. For more information, see “Desktop SNMP Option.”
Available Parameters and Values for the Transport Provider IPX
| UDP Option
This option has the following parameter and value, which are discussed on
the following pages:
TRANSPORT PROVIDER IPX | UDP
Specifies the Transport Provider option IPX or UDP configurations.
Parameter and Value
TRAP TARGET ipxaddress | ipaddress
Syntax transport provider ipx | udp
parameter_name value
Replace parameter_name with the name of the
parameter you want to use.
Replace value with the value setting which
corresponds with the parameter name.
Select either IPX or UDP as the transport protocol
used by the management station.
Example To set your client workstation for a management station of
“ab123456:0123456789ab,” you would place the
following lines in your NET.CFG file:
transport provider ipx
trap target ab123456:0123456789ab