CLI Reference Guide

2-115
NET.CFG Options Reference
Protocol TCPIP Option
PROTOCOL TCPIP
Specifies the protocol option you are making configurat ions for.
LAN Drivers
Use this parameter and value to bind the TCP/IP protocol stack to a LAN
driver., which is discussed on the following page.
The NetWare Client for DOS and MS Windows software provides ODI
LAN drivers and COMn device drivers for the TCP/IP protocol stack.
Additional
Support
NO_BOOTP
PATH TCP_CFG [[ drive: ]path [ ; ... ]]
Syntax protocol tcpip
parameter_name value
Replace parameter_name with the name of the
parameter you want to use.
Replace value with the value setting which
corresponds with the parameter name.
Example To set the IP address for your client workstation and
distinguish your connection to the network, you could
place the following lines in your NET.CFG file:
protocol tcpip
bind ne2000 2 finance-net
ip_address 129.47.30.6 finance-net
Parameter and Value
BIND odi_driver [number frame_type network_name]
Category Parameters and Values