CLI Reference Guide

2-114
NET.CFG Options Reference
Protocol TCPIP Option
Protocol TCPIP Option
Use this option of the NET.CFG file to configure the TCP/IP protocol stack
used by the TCPIP.EXE program. The TCPIP.EXE program reads the
NET.CFG file for configuration information while loading.
Run the TCP/IP Transport for DOS installation program provided on the
TCP/IP Transport for DOS diskette to obtain a copy of the TCPIP.EXE file.
See Chapter 1, “Installing the Transport,” in TCP/IP Transport for DOS
Installation Guide for instructions.
Available Parameters and Values for the Protocol TCPIP Option
This option has the following categories, parameters, and values, which are
discussed on the following pages:
Category Parameters and Values
LAN
Drivers
BIND odi_driver [number frame_type
network_name]
IP
Addresses
IP_ADDRESS ip_address [network_name]
IP_NETMASK net_mask_address
[network_name]
IP_ROUTER ip_address [network_name]
Connection
Sockets
TCP_SOCKETS number
UDP_SOCKETS number
RAW_SOCKETS number
NetBIOS
Support
NB_ADAPTER [0 | 1]
NB_BRDCAST [0 | 1]
NB_COMMANDS number
NB_DOMAIN domain_name
NB_SESSIONS number