CLI Reference Guide

2-103
NET.CFG Options Reference
Protocol IPX Option
Protocol IPX Option
Use this option of the NET.CFG file to change the default value of
parameters for the IPX™ protocol.
Available Parameters and Values for the Protocol IPX Option
This option has the following parameters and values, which are discussed on
the following pages:
PROTOCOL IPX
Specifies the protocol option you are making configurations for.
Parameters and Values
BIND LAN_driver_name [#number]
INT64 [on | off]
INT7A [on | off]
IPATCH byte_offset, value
IPX PACKET SIZE LIMIT number
IPX RETRY COUNT number
IPX SOCKETS number
Syntax protocol ipx
parameter_name value
Replace parameter_name with the name of the
parameter you want to use.
Replace value with the value setting which
corresponds with the parameter name.
Example To configure for the IPX protocol to not use interrupt 64h,
you would place the following lines in your NET.CFG file:
protocol ipx
int64 off