CLI Reference Guide

2-101
NET.CFG Options Reference
NetWare DOS Requester Option
NMR.VLM
RSA.VLM
WSASN1.VLM
WSDRVPRN.VLM
WSREG.VLM
WSSNMP.VLM
WSTRAP.VLM
You must specify the complete filename, including the .VLM extension.
WORKGROUP NET=workgroup_net_address
Provides a way for your client workstation to find workgroup information
outside of your local network.
If your client workstation resides physically on a network segment other
than the one that the workgroup you want to connect to is on, setting this
address ensures that a connection is found.
This parameter and value should be modified only with the Personal
NetWare utilities and should not be edited manually. Manually setting a
value for this parameter might result in loss of connection.
Syntax
vlm=path_vlm
Default None
Range 1 to 50
Modules VLM.EXE
Example To load AUTO.VLM, RSA.VLM, and NMR.VLM with the
core modules, you would place the following lines in your
NET.CFG file:
netware dos requester
vlm=c:\nwclient\auto.vlm
vlm=c:\nwclient\rsa.vlm
vlm=c:\nwclient\nmr.vlm