CLI Reference Guide

2-100
NET.CFG Options Reference
NetWare DOS Requester Option
NOTE: The EXCLUDE VLM parameter should be used instead of the USE DEFAULTS
parameter for excluding specific core VLM programs.
VLM=path_VLM
Specifies a .VLM file that the VLM.EXE program should load.
This parameter and value allow VLM programs not listed in the default load
table for the VLM.EXE program to be added to the table.
The following .VLM files are not listed in the default load table:
AUTO.VLM
MIB2IF.VLM
MIB2PROT.VLM
Syntax use defaults=[on | off]
Default on
Modules VLM.EXE
Example To load the AUTO.VLM file with the core modules and
disable loading of the BIND.VLM file, you would place the
following lines in your NET.CFG file:
netware dos requester
use defaults=off
vlm=conn.vlm
vlm=ipxncp.vlm
vlm=tran.vlm
vlm=security.vlm
vlm=nds.vlm
;vlm=bind.vlm
vlm=nwp.vlm
vlm=fio.vlm
vlm=general.vlm
vlm=redir.vlm
vlm=print.vlm
vlm=netx.vlm
vlm=auto.vlm