CLI Reference Guide

Contents

xiii

TRAP COMMUNITY [“name | public | private”] 2-18

Community Access Management 2-18

ENABLE MONITOR COMMUNITY [speciﬁed | any | off | omitted] 2-20

ENABLE CONTROL COMMUNITY [speciﬁed | any | off | omitted] 2-20

ENABLE TRAP COMMUNITY [speciﬁed | off | omitted] 2-20

MIB-II (Management Information Base) Support 2-22

System and SNMP Groups 2-22

SNMPENABLEAUTHENTRAP [on | off] 2-24

SYSCONTACT “contact” 2-24

SYSLOCATION “location” 2-25

SYSNAME “name” 2-25

Interface Group 2-25

TCP/IP Groups 2-26

Example of NET.CFG File Including Each Group Support 2-26

Link Driver Option 2-27

Available Parameters and Values for the Link Driver Option 2-27

LINK DRIVER driver_name 2-27

ALTERNATE 2-28

BUS ID name number 2-28

DMA [#1 | #2] channel_number 2-29

FRAME frame_type_name [addressing_mode] 2-30

Frame Types, Protocols, and LAN Drivers 2-31

Ethernet LAN Drivers 2-33

Token-Ring LAN Drivers 2-33

IRQ [#1 | #2] interrupt_request_number 2-34

MAX FRAME SIZE number 2-34

MEM [#1 | #2] hex_starting_address [hex_length] 2-35

NODE ADDRESS hex_address [mode] 2-36

LANSUP 2-37

PORT [#1 | #2] hex_starting_address [hex_number_of_ports] 2-38

PROTOCOL “name” hex_protocol_ID frame_type 2-39

Deﬁned Protocols and Frame Types 2-39

SLOT number 2-40