CLI Reference Guide

2-91
NET.CFG Options Reference
NetWare DOS Requester Option
NOTE: If both PREFERRED TREE (for NetWare Directory Services) and PREFERRED
SERVER (for bindery services) are specified, then the first protocol to successfully
attach is used, such as NetWare Directory Services or Bindery services.
PREFERRED WORKGROUP=“workgroup_name”
Sets the Personal NetWare workgroup you attach to first and helps guarantee
your connection to the network.
If the workgroup specified has a connection available, the NetWare DOS
Requester software attaches to that workgroup. Otherwise, it connects to the
nearest workgroup.
NOTE: If the PREFERRED TREE (for NetWare Directory Services), PREFERRED
SERVER (for bindery services), and PREFERRED WORKGROUP (for Personal
NetWare Services) parameters are all specified, then the first protocol to successfully
build an attachment is used.
PRINT BUFFER SIZE=number
Determines the size (in bytes) for the print buffer. The print buffer acts as a
cache for 1-byte print requests, which increases the size of some jobs.
Syntax preferred workgroup=“workgroup_name”
Default None
Modules PNW.VLM
Example To specify the MKT_9 workgroup as your preferred
workgroup connection, you would place the following lines in
your NET.CFG file:
netware dos requester
preferred workgroup=“mkt_9”
Syntax
print buffer size=number
Default 64
Range 0 to 256