CLI Reference Guide

2-89
NET.CFG Options Reference
NetWare DOS Requester Option
WARNING: If you are using this option on any client workstation not running Packet Burst,
changing the default of this parameter might result in critical network errors.
PBURST WRITE WINDOWS SIZE=number
Sets the write buffer size (in bytes) for MS Windows.
WARNING: If you are using this option on any client workstation not running Packet Burst,
changing the default of this parameter might result in critical network errors.
PREFERRED SERVER=“server_name”
Sets the NetWare server you attach to first and helps guarantee your
connection to the network.
If the server specified has a connection available, the NetWare DOS
Requester attaches to that server. Otherwise, it responds to the nearest
broadcasting server.
Example To increase the read buffer size for better performance, you
could place the following lines in your NET.CFG file:
netware dos requester
pburst read windows size=64
Syntax
pburst write windows size=number
Default 10
Range 3 to 128
Modules FIO.VLM
Example To increase write buffer size, you could place the following
lines in your NET.CFG file:
netware dos requester
pburst write windows size=24