CLI Reference Guide

2-74
NET.CFG Options Reference
NetWare DOS Requester Option
EXCLUDE VLM=path_vlm
Specifies a .VLM file that the VLM.EXE program should not load.
This parameter causes any .VLM file listed in the VLM.EXE program
default load table or in the VLM vlm_path parameter to not load when the
VLM.EXE program runs.
You must specify the complete filename, including the .VLM extension.
FIRST NETWORK DRIVE=drive_letter
Sets the first network drive to the letter of choice when the NetWare DOS
Requester software makes a connection to the NetWare server.
This parameter accepts only the drive letter and not the colon.
Syntax
exclude vlm=path_vlm
Range 1 to 50
Modules VLM.EXE
Example To exclude the loading of the PRINT.VLM,
SECURITY.VLM, and NMR.VLM files with the core
modules, you would place the following lines in your
NET.CFG file:
netware dos requester
exclude vlm=c:\nwclient\print.vlm
exclude vlm=c:\nwclient
\security.vlm
exclude vlm=c:\nwclient\nmr.vlm
Syntax
first network drive=drive_letter
Default First available drive
Range A to Z
Modules GENERAL.VLM, NETX.VLM, REDIR.VLM