CLI Reference Guide

2-66
NET.CFG Options Reference
NetWare DOS Requester Option
BIND RECONNECT=[on | off]
Automatically rebuilds bindery connections and restores drive mappings and
printer connections.
To enable the VLM.EXE program to load the AUTO.VLM file, you must
include the VLM=AUTO.VLM parameter and value.
For this parameter to work, also set AUTO RECONNECT=ON.
BROADCAST RETRIES=number
Sets the number of times the NetWare DOS Requester software broadcasts a
request.
Set this to a higher number if you are not seeing some resources in various
utility lists.
NOTE: Increasing this number decreases the response time of some utilities.
Example To save memory by shortening the average name length
allowed to eight characters, you would place the following
lines in your NET.CFG file:
netware dos requester
average name length=9
Syntax bind reconnect=[on | off]
Default off
Modules AUTO.VLM, BIND.VLM
Example To make reconnecting to bindery services automatic, you
would place the following lines in your NET.CFG file:
netware dos requester
bind reconnect=on