HP-UX Host Intrusion Detection System Version 4.2 Administration Guide

Table 4-1 Monitored Nodes
DescriptionColumn
The current state of an agent host and any surveillance
schedule. The possible status values are described in
Table 4-2 (page 50).
Status
The host name assigned on the Host Manager screen.
Host
The host IP address assigned on the Host Manager
screen.
Address
The tag name assigned on the Host Manager screen.
Tag
The name of the surveillance schedule that is currently
loaded, scheduled or running on this host. Displays
None if no schedule is currently loaded.
Schedule
The total number of alerts generated by a host. The
highest severity of all alerts is color-coded with a red
(high), yellow (medium), or blue (low) bar.
Total Alerts
The number of alerts that have not yet been marked
as seen. The highest severity of all unseen alerts is
color-coded with a red (high), yellow (medium), or
blue (low) bar
Unseen Alerts
Status line: the bottom line of the screen shows the processing and completion status
for the commands you execute.
Table 4-2 Status Field Values
DescriptionStatus Value
The agent is activating the schedule.
Activating
The agent is running on the host, but is not running a
schedule.
Available
The System Manager is downloading a schedule to the
agent.
Downloading
The agent detected an error; check the error log.
Error
No agent was detected.
No Agent Available
The System Manager is communicating with the host.
Polling
The System Manager and agent are resynchronizing.
Resyncing
The schedule is running on the agent.
Running
The schedule is waiting for its next active time block on
the agent.
Scheduled
The System Manager does not know the status of the
agent host.
Status Unknown
The agent is stopping its current schedule.
Stopping Schedule
Using the System Manager screen, you can perform the following tasks:
• “Getting the Status of Agent Hosts” (page 51)
• “Resynchronizing Agent Hosts” (page 52)
• “Activating Schedules on Agent Hosts” (page 53)
• “Stopping Schedules on Agent Hosts” (page 53)
• “Starting HP-UX HIDS Agents” (page 51)
50 Using the System Manager Screen