HP-UX Host Intrusion Detection System Version 4.1 Administrator's Guide

3. To set up the new schedule, follow the procedures in “Modifying a Surveillance
Schedule” (page 74).
Copying a Surveillance Schedule
If an existing surveillance schedule is similar to what you want to create, you can copy
the old one and change the copy.
To copy a surveillance schedule, follow the steps:
1. Go to the Schedule Manager screen.
2. Select the schedule you want to copy in the Schedules panel.
3. Create a name for the new surveillance schedule.
a. Press the Copy button on the Schedules panel. This opens the Copy
Surveillance Schedule dialog box (Figure 5-3).
Figure 5-3 Copy Surveillance Schedule Dialog
b. Enter a name in the input field. Valid characters are alphanumeric and
underscore; the first character must be alphanumeric. Schedule names are
case-sensitive. If you include invalid characters, you will be prompted to
replace them with underscores.
c. Click OK to accept it and Cancel to exit the dialog box.
The new schedule’s groups, templates, and values are identical to the old schedule’s.
4. To revise the new schedule, follow the procedures in “Modifying a Surveillance
Schedule” (page 74).
Modifying a Surveillance Schedule
To modify a surveillance schedule, follow the steps:
1. On the Schedule Manager screen select a schedule in the schedules panel.
2. If necessary, create new surveillance groups. For more information, see
“Configuring Surveillance Groups” (page 76) for details.
3. Select the Configure tab.
4. In the Select column of the Surveillance Groups panel, click the check boxes to
mark the surveillance groups you want to include in the schedule. You can also
use the Select All and Clear All buttons to mark all or none of the groups.
5. Select the Timetable tab.
74 Using the Schedule Manager Screen