Host Intrusion Detection System Administrator's Guide Release 3.0

Schedule Manager Screen

Setting Surveillance Schedule Timetables

Chapter 5

• Always On means the group will run 24 hours a day, seven days a week. If you

select this option, the group will be displayed in all the boxes in the Schedule

Summary panel and you are done setting the timetable for this group. This is the

default.

• Speciﬁed means you will choose the days and times the group will run. Continue

with the next step.

Step 6. In the Select Days panel, choose the days the group should run.

This is a list, so you can use left-click to pick a day, Shift-left-click to add in all intervening

days, and Ctrl-left-click to add or remove individual days. For more detail, see “Selecting

with the Mouse” on page 105.

You can also use:

• All to select all seven days

• None to deselect all seven days

For example, you could select Monday, Tuesday, Friday, and Sunday.

Step 7. In the Select Times panel, choose the hour blocks in which the group should run.

This is a list, so you can use left-click to pick a hour, Shift-left-click to add in all intervening

hours,and Ctrl-left-click to add or removeindividual hours.For more detail,see “Selecting

with the Mouse” on page 105.

You can also use:

• All to select all 24 hours

• None to deselect all 24 hours

For example, you could select 01:00 - 04:59, 07:00 - 07:59, and 09:00 - 16:59.

Step 8. As days and times are selected, the day-time matrix in the Schedule Summary panel

is ﬁlled in with the names of the active groups in each box. The matrix shows the sum of

all the timetables for all the groups in the selected surveillance schedule. Boxes with at

least one active group are colored green. The Schedule Summary panel is read-only.

NOTE A schedule group cannot run on different hours on different days. To do this, copy the

group and schedule the identical groups to separate times and days.

Canceling Changes

The Cancel button allow you to delete all the changes you have made to group

timetables. The button is greyed out when there is nothing to cancel.

NOTE If you switch to the Conﬁgure tab, the changes are set and the button is greyed out

when you return to the Timetable tab.