Backing Up and Restoring Data on HP-UX EVFS Volumes Using HP OpenView Storage Data Protector 6.0

The following output is displayed:
Logical volume "/dev/vg01/ldp_raw" has been successfully created with
character device "/dev/vg01/rldp_raw".
Logical volume "/dev/vg01/ldp_raw" has been successfully extended. Volume
Group configuration for /dev/vg01 has been saved in
/etc/lvmconf/vg01.conf
2. To map the LVM volume to the HP-UX EVFS volume, enter the following command:
$ evfsadm map /dev/vg01/ldp_raw
The following output is displayed:
Volume "/dev/vg01/ldp_raw" has been successfully mapped to EVFS volume
"/dev/evfs/vg01/ldp_raw"
Step 2 To restore the backed up keys of an HP-UX EVFS volume by using HP OpenView Storage
Data Protector, complete the following tasks:
1. Select Restore in the Data Protector Cell Manager Context List.
2. In the left scoping pane, expand Restore Objects and expand the source client system,
evfs2.hp.com, where the backup data is stored, as shown in the following figure:
3. Select the required directory, /etc/evfs/pkey, in the Source Property page where the
backed up keys are stored, as shown in the following figure:
55