Backing Up and Restoring Data on HP-UX EVFS Volumes Using HP OpenView Storage Data Protector 6.0

8. Select the Backup Type required. To perform the backup of the keys, select backup type

as FULL.

The Session Information message displays the status of the backup and notifies when the

backup is successfully completed.

Test Scenario 3B - Restoring the Backed Up Keys of an HP-UX EVFS Volume

This scenario illustrates the steps performed when successfully restoring the backed up keys of an HP-

UX EVFS volume by using HP OpenView Storage Data Protector.

Table14 lists the sample source and target for Test Scenario 3B.

Table 14 Sample Source and Target for Test Scenario 3B

Source/Target Description

Sample Source

Tape device or a file library device

Sample Target

Key directory structure, /etc/evfs/pkey, on

the client system, evfs6.hp.com, where HP-UX

EVFS is configured.

To restore the backed up keys of an HP-UX EVFS volume by using HP OpenView Storage Data

Protector, complete the following steps:

Step 1 To create an HP-UX EVFS volume on the client system (target), evfs6.hp.com, complete the

following tasks:

1. To create an LVM volume of size 5 GB, enter the following command:

$ lvcreate -L 5120 -n ldp_raw vg01