Backing Up and Restoring Data on HP-UX EVFS Volumes Using HP OpenView Storage Data Protector 6.0

2. To view the directory listings of the directory that is mounted on the target HP-UX
EVFS volume, enter the following command after the backup operation:
$ ll /dp_backup/
The following output is displayed:
total 400
-rw-r--r-- 1 root root 204800 Dec 15 11:34
0f6a4871545823b0e566155000f.fd
drwxr-xr-x 2 root root 96 Dec 15 10:30 lost+found
The data is backed up in the file device with an .fd extension. You can use the
strings utility to search and validate a specific key string in the file, and verify if the
backup is successful.
Step 15 To perform an incremental backup using HP OpenView Storage Data Protector, complete the
following steps:
1. Append test incremental data to the sample file on the source client system.
2. Select Backup in the Data Protector Cell Manager Context.
3. Expand Backup Specifications in the scoping pane, right-click File system, and
then click Add Backup.
4. In the Create New Backup dialog box, select the default Blank File System
Backup.
5. Select the sample files that must be backed up in the sample directory, as
shown in the following figure:
6. In the Destination property page, select the device, /dp_backup, which is
configured for the backup, as shown in the following figure:
43