Backing Up and Restoring Data on HP-UX EVFS Volumes Using HP OpenView Storage Data Protector 6.0

Step 13 Connect the tape device to the client system, evfs2.hp.com, and insert the tape.
Step 14 To auto configure, scan and format the tape device that is connected to the client system
using HP OpenView Storage Data Protector, complete the following tasks:
1. Select Devices & Media in the Data Protector Cell Manager Context List.
2. Right-click Devices in the left pane, and select Autoconfigure Devices, as shown in the
following figure.
3. Select the client system to which the tape device is connected, as shown in the following
figure:
16