Backing Up and Restoring Data on HP-UX EVFS Volumes Using HP OpenView Storage Data Protector 6.0

Data Protector
Cell Manager
HP 9000 System running HP-UX 11i v2
Client System
(Disk Agent and
Media Agent)
Integrity System running HP-UX 11i v2
Test Scenario 1
Tape device: HP:C7438A
Tapes used :DDS-2 and DDS-4
Test Scenario 2
File library device in the directory on which
the target HP-UX EVFS volume is mounted.
Backup Medium
Test Scenario 3
Tape device or file library device
Test Scenario 1
Test Scenario 1A - Full Volume Backup of Encrypted Data from an HP-UX EVFS
Volume to a Tape Device
This scenario illustrates the steps performed when successfully testing a full volume backup of
encrypted data from an HP-UX EVFS volume to a tape device, by using HP OpenView Storage Data
Protector.
Table 9 lists the sample source and target in Test Scenario 1A.
Table 9 Sample Source and Target for Test Scenario 1A
Source/Target Description
Sample Source Encrypted volume that is enabled for raw access,
/dev/evfs/vg01/ldp_raw volume on the
client system, evfs2.hp.com. The mount point in
this scenario is /dp_raw.
Sample Target The tape device that is mounted on
/dev/rmt/0m
To perform a full volume backup of encrypted data using HP OpenView Storage Data Protector,
complete the following steps:
Step 1 To create an EVFS volume on the client system (source), evfs2.hp.com, complete the following
tasks:
1. To create an LVM volume of size 5 GB, enter the following command:
11