Using DRD Activate and Deactivate to Recover from Boot Problems

Figure 14 Boot Menu with Hardware Addresses of Possible Boot Devices

Main Menu: Enter command or menu > search

Searching for potential boot device(s)

This may take several minutes.

To discontinue search, press any key (termination may not be immediate).

Path# Device Path (dec) Device Path (mnem) Device Type

----- ----------------- ------------------ -----------

P0 0/0/0/0 lan.15.1.48.3 LAN Module

P1 0/0/1/1.15 intscsia.15 Random access media

P2 0/0/2/1.15 intscsib.15 Random access media

P3 0/6/2/0.8 Random access media

Main Menu: Enter command or menu >

The administrator compares the boot devices to the saved ioscan output and selects the clone. The

command entered is “BO Pn” where “Pn” is the clone disk. The administrator then replies “N” to the

prompt “Interact with IPL (Y, N, or Cancel)?>” and the boot completes.

For More Information

See the DRD Web site at:

http://www.hp.com/go/drd

contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

5992-1912, September 2007