Exploring DRD Rehosting in HP-UX 11i v2 and 11i v3 (July 2010)

syntax check.
* The value 1 for SYSINFO_ROUTE_COUNT[0] passes the syntax
check.
* The value 255.255.248.0 for SYSINFO_SUBNET_MASK[0] passes the
syntax check.
* End of messages from validation of the system info file
"/var/opt/drd/tmp/drdblade.sysinfo".
* The file "/var/opt/drd/tmp/drdblade.sysinfo" passes the syntax
check.
* Copying New System Personality
* The sysinfo file "/var/opt/drd/tmp/drdblade.sysinfo" has been
successfully copied to the
target "/dev/disk/disk19".
======= 09/19/08 17:22:52 MDT END Rehost System Image succeeded.
(user=root) (jobid=drdbl2)
8. When the new blade arrives, it can be booted from the rehosted disk. If DHCP is used to
manage the network, the Integrated Lights Out Management Processor IP address will be
obtained from DHCP and displayed on the Front Display Panel of the new blade.
Otherwise, a serial console can be connected. See
Accessing the Integrated Lights-Out
Management Processor for further information.
From the EFI Boot Manager Menu, select the EFI shell. You will see a screen similar to the
following.
The “fs<n>” entries indicate EFI file systems. The goal is to boot from the SAN file system
containing the /EFI/HPUX/SYSINFO.TXT file. In the display, the first “fs<n>” entry
representing a Fibre LUN is “fs3”. We see the SYSINFO.TXT file in the /EFI/HPUX directory of
“fs3”: