Dynamic Root Disk A.3.13 * Release Notes (766141-001, March 2014)

ERROR: Analysis of file system creation fails.
- Analysis of target fails.
- The analysis step for creation of an inactive system image failed.
- The following messages, including errors, were obtained during
analysis:
E:The total volume sizes in disk group: "drdroot" exceed the
available capacity by 32Mb.
E:The disk capacity available is not sufficient to create the volume
"/" with the size specified (disk space is short by 32Mb). Reduce
the size of this volume (or other volumes that share the same disk
group), or use additional/larger disks.
.
* Analyzing For System Image Cloning failed with 1 error.
======= 07/02/08 13:16:16 EDT END Clone System Image failed with 1 error.
(user=root) (jobid=lccns166)
• QXCR1000964506: When an 11.23 system is cloned and then updated to 11.31. The clone
can now be mounted from the updated 11.31 system and remain bootable.
• QXCR1000976296: The command drd runcmd swlist -l depot fails. Drd is fixed to
enable this, so drd runcmd can list the depots in the depot registry at the time the DRD clone
was created. Note, it is preferable to focus on depots registered on the active system because
drd is being improved to use depots that are on the active system and are not in the DRD
clone.
• QXCR1000983266: During drd runcmd update-ux -s /depot, the following message
needs a space between /opt/swm/bin/swm and oeupdate: * Executing command:
/opt/swm/bin/swmoeupdate -s /depot The DRD message has been fixed to be: *
Executing command: /opt/swm/bin/swm oeupdate -s /depot
• QXCR1000984246: Prior to the fix for QXCR1000984246, drd clone may fail if the
booted system was previously an inactive image that was modified or listed repeatedly with
drd runcmd. If it is an LVM-managed root, the clone will produce messages similar to these:
ERROR: Cloning of source system image fails.
- Cloning the system image fails.
- Reading of command output fails.
- Could not read from file "/var/opt/drd/tmp/drd1UOWhrCb/wUHPy9pu":
Resource temporarily unavailable (errno=11).
* Copying File Systems To New System Image failed with 1 error.
The fix for QXCR1000984246 eliminates this clone failure.
QXCR1000985424: The release of A.3.4 introduced a regression that caused creation of mirrored
clones to fail. This regression has been fixed in A.3.5.
12 Supported DRD releases