Dynamic Root Disk A.3.12.* Administrator's Guide

Example 10 The drd mount command output
# /opt/drd/bin/drd mount
======= 12/08/06 22:19:31 MST BEGIN Mount Inactive System Image (user=root)
(jobid=dlkma1)
* Reading Current System Information
* Locating Inactive System Image
* Mounting Inactive System Image
======= 12/08/06 22:19:52 MST END Mount Inactive System Image succeeded.
(user=root) (jobid=dlkma1)
The drd mount command automatically chooses the mount point for the inactive system image.
If the image was created by the drd clone command, the mount point is /var/opt/drd/mnts/
sysimage_001. If the clone has been booted, drd mount mounts the original system at the
mount point /var/opt/drd/mnts/sysimage_000. To see all mounted file systems, including
those in the active and inactive system images, execute the following command:
# /usr/bin/bdf
The output of this command should look similar to Example 4-2, if the drd mount command has
been executed:
Example 11 The bdf command output
# /usr/bin/bdf
file system kbytes used avail %used Mounted on
/dev/vg00/lvol3 1048576 320456 722432 31% /
/dev/vg00/lvol1 505392 43560 411288 10% /stand
/dev/vg00/lvol8 3395584 797064 2580088 24% /var
/dev/vg00/lvol7 4636672 1990752 2625264 43% /usr
/dev/vg00/lvol4 204800 8656 194680 4% /tmp
/dev/vg00/lvol6 3067904 1961048 1098264 64% /opt
/dev/vg00/lvol5 262144 9320 250912 4% /home
/dev/drd00/lvol3 1048576 320504 722392 31% /var/opt/drd/mnts/sysimage_001
/dev/drd00/lvol1 505392 43560 411288 10% /var/opt/drd/mnts/sysimage_001/stand
/dev/drd00/lvol4 204800 8592 194680 4% /var/opt/drd/mnts/sysimage_001/tmp
/dev/drd00/lvol5 262144 9320 250912 4% /var/opt/drd/mnts/sysimage_001/home
/dev/drd00/lvol6 3067904 1962912 1096416 64% /var/opt/drd/mnts/sysimage_001/opt
/dev/drd00/lvol7 4636672 1991336 2624680 43% /var/opt/drd/mnts/sysimage_001/usr
/dev/drd00/lvol8 3395584 788256 2586968 23% /var/opt/drd/mnts/sysimage_001/var
In this output, file systems identified as dev/vg00/* are the active system image file systems.
Those identified as /dev/drd00/* are the inactive system image file systems.
Performing administrative tasks on the inactive system image
The following examples show some tasks you can perform on the inactive system image.
TIP: HP recommends that a clone be deployed shortly after creating and (optionally) modifying
it.
Performing administrative tasks on the inactive system image 21