HP-UX Directory Server 8.1 installation guide

[General]
FullMachineName= dir.example.com
SuiteSpotUserID= www
SuiteSpotGroup= other
AdminDomain= example.com
ConfigDirectoryAdminID= admin
ConfigDirectoryAdminPwd= admin
ConfigDirectoryLdapURL= ldap://dir.example.com:389/o=NetscapeRoot
[slapd]
SlapdConfigForMC= Yes
UseExistingMC= No
ServerPort= 389
ServerIdentifier= dir
Suffix= dc=example,dc=com
RootDN= cn=Directory Manager
RootDNPwd= password123
[admin]
Port= 9830
ServerIpAddress= 192.0.2.11
ServerAdminID= admin
ServerAdminPwd= admin
NOTE:
To create the default Directory and Administration Servers, the setup file must contain three
sections of directives: [General], [slapd], and [admin].
You can use silent mode to create additional Directory Server instances, in which case you
omit the [admin] from the setup file. For more information, see “Creating a new Directory
Server instance silently” (page 39).
The predefined parameters in the setup file correspond to the information supplied during
a typical setup. The setup file structure and directives are described in “Setup file directives”.
To create a setup file, you can run the setup script interactively with the -k option, which
saves the setup file (.inf) after the installation. You can then use variations of this setup
file for silent set up of subsequent instances, defining a unique instance name and port
number for each run (and if setting up Directory Server on another system, defining the
host name). For examples of setup files created using typical setup mode and custom setup
mode, see “Sample setup files” (page 34).
3. Run the setup-ds-admin script with the -s and -f options.
# /opt/dirsrv/sbin/setup-ds-admin.pl -s -f /export/ds-inf/setup.inf
Running setup-ds-admin installs both the Directory Server instance and the Administration
Server instance. This means that the setup file must specify parameters for both the Directory
Server and the Administration Server. The -s option runs the script in silent mode, and -f
/export/ds-inf/setup.inf specifies the setup file to use (setup.inf).
After the script runs, the new Directory Server and Administration Server instances are configured
and running, as with a standard setup.
3.6.7.1 Setup file structure
With a silent setup, all the configuration information that is normally supplied interactively with
the setup script must be included in the setup file or passed in the command line with the
setup-ds-admin.pl (or setup-ds.pl) command.
The setup file has three sections:
General
It supplies information about the server machine; these are global directives that
are common to all your Directory Servers.
30 Setting up HP-UX Directory Server