HP-UX Directory Server 8.1 installation guide

2.4.3 TIME_WAIT setting
Normally, client applications that shut down correctly cause the socket to linger in a TIME_WAIT
state. Verify that the TIME_WAIT entry is set to a reasonable duration. For example:
# ndd -set /dev/tcp tcp_time_wait_interval 60000
This limits the socket TIME_WAIT state to 60 seconds.
2.4.4 Large file support
To run Directory Server on HP-UX, you must enable large file support for the file system where
the directory data is stored. By default, directory data is stored below the /var/opt/dirsrv
directory. If large file support is not enabled for the file system for this directory, use the fsadm
command to enable it. In the following example, the root of the file system for the /var/opt/
dirsrv directory is /var:
# fsadm -F vxfs -o largefiles /var
If the file system for the /var/opt/dirsrv directory does not support online administration,
you must unmount the file system and specify the device file. For more information, see fsadm(1m).
14 System requirements