HP-UX Directory Server 8.1 configuration, command, and file reference

flushed to the file. Disabling log buffering can severely impact performance in heavily loaded
servers.
DescriptionParameter
cn=config
Entry DN
on or off
Valid Values
onDefault Value
Directory StringSyntax
nsslapd-accesslog-logbuffering: offExample
2.3.1.5 nsslapd-accesslog-logexpirationtime (Access log expiration time)
This attribute specifies the maximum age that a log file is allowed to reach before it is deleted.
This attribute supplies only the number of units. The units are provided by the
nsslapd-accesslog-logexpirationtimeunit attribute.
DescriptionParameter
cn=config
Entry DN
–1 to the maximum 32-bit integer value (2147483647)
A value of -1 or 0 means that the log never expires.
Valid Range
–1Default Value
IntegerSyntax
nsslapd-accesslog-logexpirationtime: 2Example
2.3.1.6 nsslapd-accesslog-logexpirationtimeunit (Access log expiration time unit)
This attribute specifies the units for nsslapd-accesslog-logexpirationtime attribute. If
the unit is unknown by the server, then the log never expires.
DescriptionParameter
cn=configEntry DN
month |week|dayValid Values
monthDefault Value
Directory StringSyntax
nsslapd-accesslog-logexpirationtimeunit: weekExample
2.3.1.7 nsslapd-accesslog-logging-enabled (Access log enable logging)
Disables and enables accesslog logging but only in conjunction with the nsslapd-accesslog
attribute that specifies the path and parameter of the log used to record each database access.
The following table describes the attribute parameters.
DescriptionParameter
cn=config
Entry DN
on or off
Valid Values
onDefault Value
2.3 Core server configuration attributes reference 25