HP-UX Directory Server 8.1 administration server guide

The Use Default User Director y radio button uses the default user directory associated
with the domain. To use multiple Directory Server instances or to use a different instance,
select the Set User Directory radio button and set the required information:
• The LDAP Host and Port field specifies the location of the user directory instance.
It is possible to configure multiple locations for the user directory for authentication
and other directory functions; separate each location with a space. For example:
server.example.com:389 alt.example.com:389
NOTE:
If more than one location is given in the LDAP Host and Port field, the settings for the
remaining fields will apply to all those instances.
• Check the Secure Connection box to use SSL to connect to the user directory. Only
select this if the Directory Server is already configured to use SSL.
• Give the User Directory Subtree. For example:
dc=example,dc=com
Every location listed in the LDAP Host and Port field must contain that subtree and
the subtree must contain the user information.
• Optionally, enter the Bind DN and Bind Password for the user which connects to the
user directory.
6. Click Save.
32 Admin Server configuration