Reference Guide

170 Chapter 8
Diagnostic Messages
Error Messages
1083 MESSAGE Floating point register %s is
out of range
CAUSE The value supplied does not
correspond to a legal floating-point
register number.
ACTION Supply a valid floating-point register
number.
1084 MESSAGE Control register %s is out of
range
CAUSE The value supplied does not
correspond to a legal control register
number.
ACTION Supply a valid control register
number.
1085 MESSAGE Illegal value for alignment
CAUSE The value supplied for alignment is
not a valid alignment value. Valid
values are powers of 2 that are
greater than zero and less than or
equal to 4096.
ACTION Change alignment value to a legal
value.
1086 MESSAGE Only one type can be
specified for a symbol with
.EXPORT
CAUSE More than one symbol type was given
for the .EXPORT directive.
ACTION Remove the extra type from the
.EXPORT directive.
1087 MESSAGE Bad value for .SHLIB
parameter, format is
"mm/yyyy"
CAUSE The parameter to the .SHLIB
directive was not in the proper
format. The format must be
mm/yyyy, when mm is the integer