Reference Guide

Chapter 8 157
Diagnostic Messages
Error Messages
1016 MESSAGE General register %s is out of
range
CAUSE Register number specified greater
than 31 or less than 0.
ACTION Use a valid general register number
between 0 and 31.
1017 MESSAGE Value of %s for space
register not in %sr0..%sr3
CAUSE Space register specified was not in
the legal range.
ACTION Use a space register in the valid
range 0 to 3.
1018 MESSAGE Value of %s for space
register not in %sr0..%sr7
CAUSE Space register number specified
greater than 7 or less than 0
ACTION Use a valid space register number
between 0 and 7.
1019 MESSAGE Opcode %s not defined
CAUSE Characters in the opcode field do not
comprise a legal machine instruction
or directive.
ACTION Starting in column 2, use only valid
opcodes and directives as specified in
PA-RISC Architecture and
Instruction Set Reference Manual.
1020 MESSAGE Number required for keyword
value
CAUSE A .CALLINFO keyword was assigned
a non-numeric argument.
ACTION Ensure that .CALLINFO keywords
are assigned numeric or register
values.
1021 MESSAGE Unrecognized value for
keyword