HP-UX Desktop Troubleshooting Guide

If the above-mentioned command is not displayed, it indicates that the rpcbind process
is not running. To start the rpcbind process, execute the # /usr/sbin/rpcbind
–w warmstartup command.
Once the above-mentioned procedures are followed, run:
• # init 2
• # init 3
NOTE: GR8 reference call:
http://gr8.mvlabs.corp.hp.com/gr8/stable/callEdit.pl?call=4000142281
For a similar problem as dthello screen, please refer the above link.
5.1.8 Check problems with the dtsession screen
The dtsession is the actual CDE environment. The dtsession manages all the CDE
components such as application manager, file manager, and dtpad. If you are able to
successfully login through the dtgreet screen and you are able to view the dthello
screen, but you cannot view dtsession, check for any change in the network
configuration, such as in DNS, NIS, and so on.
5.1 Troubleshooting the HP-Server Console 23