Planning and Configuring HP-UX DCE 2.0

Configuring HP-UX DCE Cells
Configuring Cells Using dce_config
Chapter 6 55
The DTS null time provider configures a system to trust its own
clock as an accurate source of time. The DTS ntp provider obtains an
accurate source of time from some other system outside the cell. The
spectracom time provider uses a local hardware device as a time
provider. See the OSF DCE Administration Guide for more
information on time providers.
14. Select the DTS Time Provider:
selection: 4 (DTS Time Provider)
The following menu is displayed:
DTS Time Provider Menu
1. Configure a NULL time provider
2. Configure a NTP time provider
3. Configure a Spectracom time provider
98. Return to previous menu
99. Exit
selection:
15. Select NULL, NTP, or SPECTRACOM:
selection: 1 (NULL time provider)
or
selection: 2 (NTP time provider)
or
selection: 3 (spectracom time provider)
If you select the NTP time provider, the following prompt appears:
Enter the host name where the NTP server is running:
If you select the spectracom time provider, the following prompt
appears:
Enter the device name where the TP is connected:
You have now completed configuration of the server systems.
Configuring Client Systems: Security, CDS, and DTS
Before configuring clients, first configure your server systems. Then use
this procedure to configure client systems.