Planning and Configuring HP-UX DCE 2.0

Configuring HP-UX DCE Cells
Configuring Cells Using dce_config
Chapter 6 53
CAUTION Do not configure an additional CDS Server or a replica of a CDS
Server on the same system as your Security Server. Such a
configuration is illegal and unsupported.
9. From the Initial Cell Configuration menu, choose Initial CDS Server:
selection: 2 (Initial CDS Server)
Initial Cell Configuration (on hostname)
This routine starts up cdsadv and cdsd, initializes the name space,
and sets ACLs for all new name space entries.
S:****** Configuring initial CDS Server...
S:****** Please wait for user authentication and
authorization...
S:****** Checking for active sec_client service...
10. dce_config asks whether it should create a LAN profile for use in
dividing clients and servers into profile groups for higher
performance in multi-LAN cells. If you choose to have a LAN profile
created, dce_config asks for the name of the local LAN. The name
you provide is arbitrary, and is used by dce_config to store LAN
profile information.
Create LAN profile so clients and servers can be divided
into profile groups for higher performance
in a multi-lan cell? (n) y
What is the name of the LAN? lan_250
S:****** Starting cdsadv...
S:****** Starting cdsd...
S:****** Creating LAN profile...
S:****** Setting ACLs for all new namespace entries...
This system is now configured as a CDS server. You must now create
a DTS server, either on this system or on another system.
Time servers should be configured in any cell of more than one
system. A minimum of three Time servers is recommended for any
cell with three or more member systems. See the OSF DCE
Administration Guide - Core Services for a discussion of the
optimum placement of servers in a cell with gateway or WAN links.
DTS servers may be configured on any system in the cell.