Planning and Configuring HP-UX DCE 2.0

Configuring HP-UX DCE Cells
Configuring Cells Using dce_config
Chapter 652
Enter keyseed for initial database master key:
7. dce_config prompts you to choose the Cell Administrator's principal
name and password. The default principal name for the Cell
Administrator is cell_admin:
Enter desired principal name for the Cell
Administrator:(cell_admin)
Enter desired password for the Cell Administrator:
8. dce_config prompts you for the starting point for UNIX user and
group IDs that will be generated by the DCE Security Service. This
step prevents the DCE Security Service from generating IDs that are
already in use by your system. Type < RETURN> to choose the default
value, or enter a value of your choice:
S:****** The current highest UNIX ID for persons is N.
Enter the starting point to be used for UNIX
IDs that are automatically generated by the Secu rity
Ser-vice when a principal is added using
"rgy_edit ": ( N+100) < RETURN>
S:****** The current highest UNIX ID for groups is N. Enter
the starting point to be used for UNIX
IDs that are automatically generated by the Security
Service when a group is added using
"rgy_edit ":( N+100) < RETURN>
dce_config then starts up secd and initializes the registry
database.
S:****** Starting secd...
S:****** Checking for active sec_client service...
S:****** Starting sec_client service...
S:****** Initializing the registry database...
This system is now configured as the master Security server. You
must now create a CDS server, either on this system or on another
system:
• If the CDS server for this cell will be on another system, repeat
steps 1 and 2 on that system, and continue with step 10 below.
• If the CDS server is on the same system as the Security server,
continue with step 9 below.