Planning and Configuring HP-UX DCE 2.0

Before Installing HP-UX DCE Version 2.0
Prerequisites
Chapter 4 33
Prerequisites
System Requirements
The following sections discuss the hardware, disk space, operating
system, and other requirements that must be considered before
installing HP-UX DCE 2.0.
Hardware Requirements
You require an HP Integrity server or HP-UX 9000 server.
Disk Space Requirements
Following are the disk space requirements for installing HP-UX DCE
2.0:
• Minimum 32 MB memory space for client-only systems; 64 MB for
server systems
Minimum 92 MB disk space required for a full installation
Minimum 100 MB swap space for client-only systems; 150 MB for
server systems
NOTE HP recommends device swap over file swap.
Operating System Requirements
You require HP-UX 11i v3 for installing HP-UX DCE 2.0.
Other Requirements
Following are the other requirements for installing HP-UX DCE 2.0:
• The HP-UX kernel parameter maxfiles must be increased to 256
and the parameter maxuser must be increased to 64 for all systems.
The maxdsize parameter may have to be increased for some
systems.