Planning and Configuring HP-UX DCE 1.9

Chapter 6

Conﬁguring HP-UX DCE Cells

Note for Users of NCS-based Software

At HP-UX 11.0, NCS has been obsoleted. Users of NCS-based software must take the following precautions

when conﬁguring HP-UX DCE 1.9:

1. Before conﬁguring HP-UX DCE 1.9, stop any servers for NCS-based applications.

2. Stop glbd (via drm_admin "stop") if it is running.

3. Stop llbd (via kill(1)).

4. Conﬁgure HP-UX DCE 1.9.

5. If DCE is conﬁgured, proceed to step 6.

If DCE is not conﬁgured, the script /sbin/init.d/ncs starts NCS services if they are conﬁgured. (NCS is

conﬁgured if START_LLBD=1 in /etc/rc.config.d/ncs.)

6. Restart any servers for NCS-based applications.