Planning and Configuring HP-UX DCE 1.9

Chapter 4

Before Installing HP-UX DCE Version 1.9

Overview

The following is a brief overview of the HP-UX DCE installation process:

NOTE If you are performing an upgrade rather than a new installation, see Chapter 3, “Migrating to

HP-UX DCE 1.9,” on page 25.

• Verify that hardware and software prerequisites are met at your site.

• Plan where you will install various HP-UX DCE ﬁlesets.

• Load HP-UX DCE software from media to a network distribution area.

• Install ﬁlesets on individual systems.

• If necessary, remove unwanted ﬁlesets using swremove.