Planning and Configuring HP DCE 1.8

Chapter 5 93
Configuring HP DCE Cells
Configuring Cells Using dce_config
intercell communication with GDA.
1. Start dce_config on the GDA server system.
2. From the DCE Configuration Menu, choose Additional Server
Configuration:
selection: 2 (Additional Server Configuration)
3. Choose GDA Server:
selection: 7 (GDA Server)
The system configures the GDA server and starts the GDA server
daemon, gdad.
Creating a Security Server Replica
A feature of HP DCE/9000 is Security Server Replication, which provides
improved cell performance and reliability. These steps will allow you to
create a security replica via dce_config.
1. From the DCE Configuration Menu:
DCE Configuration Menu
selection: 2 (Additional Server Configuration)
2. From the Additional Server Configuration Menu, choose Replica
Security Server:
Additional Server Configuration (on hostname )
selection: 8 (Replica Security Server)
S******:Configuring Security Replication
S:****** starting slave security server (secd)...
The default name for the replica is subsys/dce/sec/$HOSTNAME.If
you want to change the name of the security replica that is created by
dce_config, change the value of SEC_REPLICA, either in
/etc/opt/dce/ dce_com_env, or in the shell environment from
which dce_config is run. Note that you must do this before running
dce_config.
3. dce_config prompts for a name for the security replica. Enter
whatever name you wish:
Enter the Security Replica name (without subsys/dce/sec):